How to setup a full Ethereum node in a CentOS 7 VPS server ...

Blindspot Whitepaper: Specialized Threat Assessment and Protection (STAP) for the Blockchain

BlindSpot™
Stop attacks before ”zero day” and stop the Advanced Persistent Threat (APT)
We live in a dangerous world — our information technology systems face that danger every single day. Hackers are constantly attempting to infiltrate systems, steal information, damage government and corporate reputations, and take control of systems and processes.
Hackers share and use a variety of tools and techniques to gain access to, and
maintain access to, IT systems, including groups and techniques so dangerous
they have their own category - the Advanced Persistent Threat (APT). At the
center of the APT are sophisticated techniques using malware to exploit vulnerabilities in systems. Traditional cyber security technologies use file signatures to locate these tools and hacker malware, but hackers are now actively camouflaging their tools by changing, customizing, and “morphing” them into new files that do not match any known signatures (‘Polymorphic Malware’). This introduces a massive gap in malicious file detection which leaves the enterprise open to exploitation — and it’s just not possible for traditional signature-based systems to keep up. In fact, signature-based anti-virus and anti-malware systems are only around 25% effective today. BlindSpot™ sees through it all, even as the files morph and change in a futile attempt to remain camouflaged.
Digital File Fingerprints
Any File Type, Any Language, Partial Matches, Exact Matches
BlindSpot™, the adaptive security solution from BlindSpot™, can see through the
Polymorphic camouflage used by the worlds most advanced hackers by utilizing
digital file fingerprints and our proprietary adaptive BlindSpot™ ‘brain’ that constantly analyzes the fingerprints of known malicious files and tools to locate partial matches within the files on your systems - servers, laptops, desktops, USB drives, and even mobile devices. BlindSpot™ can cut right through the Polymorphic files, revealing the true hacking tools underneath, even if they are only fragments or pieces of a more complete set of hacking tools and technologies.
Most cyber attacks happen weeks or even months after their initial penetration and access to a network or system, and even the simplest attacks tend to have a fuse that is typically several days. It takes them time to map out a system, probe for the information they want, and obtain or forge credentials with the type of access they need. But from the moment their tools first land on your network and systems, BlindSpot™ sees them. If fact, BlindSpot™ can see them sitting on a newly inserted USB drive even if the files are not copied to your systems. This means BlindSpot™ can identify and alert you to malicious files and potential illicit activities before the attack happens - before zero day!
How does BlindSpot™ work? BlindSpot™ sits on the endpoint and continuously monitors file activity. Digital fingerprints, which can be used to find partial matches of any file type in any language, are reported back where they are kept forever in a temporal repository.
BlindSpot™ looks through all of the digital fingerprints — both those from files on your systems and those in a constantly updated database of known malicious files and hacking tools, to locate and alert you to any indication of hacking, malicious files, or illicit activity. BlindSpot™ is a disruptive technology that can see polymorphic malware and stop attacks before zero day.
Digital File Fingerprints are created from a file or a piece of digital data/information by using advanced mathematics to look at all of the small pieces of data that make up the file to create a very small, unique piece of mathematical data — a digital file fingerprint. Files may be of any file type and in any language - digital fingerprints can find partial and exact matches regardless of what is in the file itself.
Just like with humans, once a fingerprint has been taken, you no longer need the
person to identify them. The fingerprint is enough. Even a partial fingerprint is
enough, and sometimes a smudge will do. Digital fingerprints work on the same
principle. Once BlindSpot™ has taken a digital fingerprint of a file, the file is no longer needed to identify it or to compare it with other files. And because digital fingerprints are tiny, they are easy to store. Even a multi-gigabyte file has a digital fingerprint that is no larger than 10k bytes.
Once you have two sets of digital fingerprints, you can compare them. Because BlindSpot™ starts with full fingerprints of known malicious files, it can identify matching files even when the digital fingerprint is only partially there. And with BlindSpot™’s advanced processing capabilities, file fragments, recovered data from a hard drive, partially downloaded documents, damaged files (both intentional and accidental) and other incomplete file structures can be properly fingerprinted in a way that still allows matches to be found.
Other technologies and software use static signatures, which do not work if any part of a file, regardless of how small, is different from another, or if the file is damaged in any way. BlindSpot™ and digital fingerprints enable partial matching, and can see through the camouflage that has become the industry standard for hackers across the globe. Static signature based solutions simply cannot do this.
Imagine your favorite detective drama on TV. The prosecutor says “This partial
fingerprint was found at the crime scene and the video camera across the
street recorded a perfect image of the person’s face.” The jury deliberates and
compares the picture and fingerprints of the defendant that were taken the day
before. They conclude, because the fingerprint was not all there and was not 100% identical, and because one picture showed a mustache that looked identical but was one millimeter longer than the other picture, that the two people were not identical - and set the criminal free. Well, that show wouldn’t be on TV long because crime would run rampant. Now imagine they had BlindSpot™. Criminals would be caught, the town would be a much safer place, and the show would be on for years to come.
Now imagine your network and systems without BlindSpot™, where traditional
exact match signature software is on your front line of defense. All kinds of
malicious files could walk right through and sit down on your hard drives, just
waiting for hackers to activate them. But you don’t have to imagine what your
systems would be like with BlindSpot™ — instead, simply contact us, get BlindSpot™ in place, and we’ll work with you to show you what’s really on your systems and help you keep those systems safe.
Ensuring System Compliance
Take the guesswork out of compliance assessment
All Government systems go through Certification and Accreditation. BlindSpot™ can help you with malicious code protection, for both security considerations and required compliance. Guidelines found in NIST 800-53 Revisions 3+ Security Requirements for System Integrity, SI-3 Malicious Code Protection, state that malicious code protection mechanisms must be employed at information system entry and exit points, including workstations, notebook computers, and mobile devices, to detect and eradicate malicious code.
BlindSpot™, with its continuous monitoring of the files on your endpoints and its
continuous updating of its known malicious file repository, will provide the
required real-time and full monthly re-scans of your files, will alert your
administrative staff when malicious code is found, will provide reports on
potential malicious files, illicit activity, and follow-up with very short false positive reports. BlindSpot™’s false positive rate is less than 0.01%. BlindSpot™ helps organizations meet the security requirements set forth and ensure compliance.
Intellectual Property Protection
Track sensitive information as it changes and moves around the enterprise
BlindSpot™ uses digital file fingerprints to identify partial and exact matches between files, regardless of file type or language. This ability can be used to track movements of and changes to files on a network of computers.
Government entities and corporations need to addresses the issue of monitoring
documents and files that contain sensitive information intellectual property, and it
is no longer sufficient to simply store them on a secure server and require specific credentials to access the information. People, both unintentionally and sometimes with malicious intent, copy and paste parts of documents, move files to USB drives, and otherwise edit and transfer files in order to get them on to a laptop, share them with a co-worker, or exfiltrate confidential information to outside networks and systems. BlindSpot™ carefully watches all of the files on your network, including what’s going with USB drives. If someone copies part of a file that has sensitive data to another file, BlindSpot™ sees it. Furthermore, BlindSpot™ can alert you when it sees questionable activity with certain documents/files or with specific computers/individuals.
Your sensitive files now have a watchdog that catches both unintentional and
malicious exposure to non-secure systems. Use BlindSpot™ to set up a custom
database of the locations where your sensitive files are stored, and BlindSpot™ will create a set of digital file fingerprints that can be used to track those files across your network and systems. This ensures that an organization can know where its proprietary and sensitive information is 365/7/24, in real-time.
Supervisory Control and Data Acquisition (SCADA) Systems
Supervisory Control and Data Acquisition (SCADA) is a system for remote monitoring and control that operates with coded signals over communication channels (using typically one communication channel per remote station).
SCADA networks contain computers and applications that perform key functions in providing essential services and commodities (e.g. electricity, natural gas, gasoline, water, waste treatment, transportation) to all Americans. They are part of the nation’s critical infrastructure, provide great efficiency, are widely used, and require protection from a variety of cyber threats.
One of the most significant threats is benign files residing on the computers on
the network that morph into tools that hackers can use to gain access to the
network and the equipment it monitors and/or controls. These files might be part
of the operating system (binary files), might be a normal file that includes
scripting, or can even be a general data file moved onto the computer through a
network or a USB drive. By morphing, these files circumvent detection and
countermeasures. This is just one example of how a hacker can compromise and
exploit the system and the worst part is that you will never know until it is too late!
The recent Department of Justice announcement charging Iranian hackers
believed to be tied to the 2013 hacking of a New York dam illustrates this threat
clearly.
Enter BlindSpot™’s BlindSpot™ Adaptive Security — BlindSpot™ monitors all files of all types (any format or language) without the requirement of a translator or human operator. BlindSpot™ can see right through the hacker’s camouflage of
morphing files to quickly identify problems and threats before hackers have the
opportunity to active and use their tools. For U.S. and foreign based systems,
BlindSpot™ is a must have cyber security solution.
The BlindSpot™ team has extensive experience with SCADA systems and critical infrastructure. Our BlindSpot™ solution is critical to the overall security framework of such systems as it was designed to find the morphing, malicious files and associated illicit file activity that can lead to compromise of the integrity, confidentiality and/or availability of the system. Threats loom on both the inside and outside, and the dynamic nature of these systems require continuous, temporal monitoring to stop cyber attacks before they happen.
Stop Ransomware
Identify and remove Ransomware before it encrypts your files
Ransomware attacks are on the rise and affect Fortune 500 companies, Federal
organizations, and consumers. This vicious type of attack affects your user’s ability to get their work done and prevents users from accessing files on a device or network by making the device or network unusable, by encrypting the files your users need to access, and/or by stopping certain applications from running (e.g. the web browser). A ransom is then demanded (an electronic payment of currency or bitcoins) with the promise that your data will be unencrypted and accessible again following the payment.
If the ransom payment is made, there is no guarantee that the data will be
unencrypted or returned to a state of integrity and/or availability. Furthermore,
there is also no guarantee that the people behind the ransom will not re-infect
your systems again with a variant of what was initially used. Payment encourages future attacks because they know you cannot detect it and will pay again next time. Surprisingly, there are only a handful of known ransomware files in use today (e.g. Crowti, Fakebsod). Safeguards exist that use static signatures to find exact matches for these known files, but the moment these files morph or are changed in any way they become undetectable by these solutions. BlindSpot™ digs deeper with digital file fingerprints and can find the new files, enabling you to analyze, quarantine, or delete them before they activate. This pro-active approach can be the difference between a system being protected and a system being made completely unavailable with encrypted data being held hostage for a ransom. The image below is an actual Fakebsod notification message.
BlindSpot™ uses digital file fingerprints to detect the ransomware by looking at
both partial and exact matches and can report the problem before it happens.
Ransomeware of the past attacked your personal computer and today’s variant
attacks the servers — BlindSpot™ can detect both.
Case Study: March 2016 - Two more healthcare networks are hit by ransomware targeting servers. Advice from law enforcement — pay the ransom! (They did). File backups are insufficient. Paying ransoms is costly and only encourages repeat attacks.
BlindSpot™ is the most comprehensive solution available to detect and root out
ransomware. Take charge of the situation and put BlindSpot™ to work continuously monitoring your systems.
Get BlindSpot™ Now
Commercial or Government, with multiple contract vehicles available
How Can I Get BlindSpot™?
CYBR develops and sells its adaptive enterprise cyber security software product, BlindSpot™, and provides professional services and support for BlindSpot™ implementations.
Product
BlindSpot™ Adaptive Security is a continuous monitoring enterprise solution that tracks file-based activity on the endpoint using digital file fingerprints, can identify problems and cyber threats before zero day, and can see through morphing, camouflaged (polymorphic) files to make accurate determinations of malicious files and illicit activity.
Deployment Options
BlindSpot™ can deployed as a secure cloud application for maximum flexibility, a standalone Enterprise implementation for maximum security, or the two combined in an Enterprise implementation augmented through a secure cloud gateway.
Professional Services and Training
BlindSpot™’s team of cyber security experts have the expertise to support
you by creating a holistic, enterprise security framework that consists of people,
policy, procedures and technology that will ensure a security posture that implements the best risk management strategies, tactics and operations available.
Email us at [[email protected]](mailto:[email protected]) for more information.
BlindSpot Solution Brief
June 29, 2018
POC: Shawn R. Key CEO, President
[[email protected]](mailto:[email protected])
Executive Summary and Estimated Pricing
CYBR’s BlindSpot is an enterprise cyber security solution that pro-actively identifies unknown and known malicious files and circumventive activity on endpoint devices. It is designed to interact with the CYBR Ecosystem and associated Web Portal. Distributed clients serve as the connection to the various BlindSpot server tiers.
BlindSpot identifies Illicit File Activity (IFA) and associated hacker activity via perceptive, industry standard algorithms. BlindSpot identifies exact AND similar files regardless of file type and/or language. This applies to ALL file types (e.g. documents, images, audio and video, carrier, etc.). Currently implemented safeguards and counter measures (such as anti-virus (AV), content filters and malware analysis tools) cannot address polymorphic/adaptive files and emerging threats. This introduces a massive gap in illicit file detection and leaves the enterprise open to exploitation. BlindSpot fills that void.
Additionally, corporations and government entities have a need to address known files and associated activity with regards to content and data management. The uncertainty of Intellectual Property (IP) location and propagation poses significant risk to the organization. The ability to identify the life cycle of a file (origin, source, destination, attributes and proliferation) ensures an organization knows where its proprietary, sensitive and privacy information is 365/24/7, in near real-time.
BlindSpot, is significantly different from solutions in the emerging Specialized Threat Assessment and Protection (STAP) marketplace, as it scales to meet the needs of enterprise organizations and the commercial marketplace. BlindSpot’s proprietary database consists of millions of unique, digital identifiers (hash values) that identify exact AND similar, modified files. This ensures that files existing in their original state or those which have been intentionally modified, do not circumvent detection. Our algorithms ensure near zero false positive return rates. The combinatory effect and the rare expertise of our executives and development thwarts potential competition as BlindSpot is an enterprise solution; not a tool.
The enterprise solution is provide as a license per IP address with associated appliance and/or server hardware requirements.
CYBR BlindSpot Technical Deep Dive
CYBR’s BlindSpot product is currently available as a Software as a Service) (SaaS) deployment blockchain solution and will be available as a full enterprise-install by Q2 2019. In both implementations, end-point agent software monitors the hard drive(s) of a computer or server, analyses any files that change, and reports [multiple] file hashes back to the main system. This enables the main system to effectively monitor which files could be malicious or represent intellectual property on the computers and servers within the customer’s network. By using fuzzy hashing algorithms, the system can detect polymorphic malware and intellectual property that has been partially hidden or obfuscated.
Applications
End-point (client) agent: native to each major OS as a fat client. Currently we have end-point agents for Microsoft Windows-based systems using MS .NET c# 2.0/4.5 and C++, although the c# portion will be replaced with all c++ code to increase scalability, efficiency, and security, in Q1 2016. End-point agents for Mac OS (written in Objective-C) and popular Linux platforms (written in c++) will ship in Q1/Q2 2016. Development work on the CentOS linux agent will begin in December 2015.
The Control Application enables system administrators to configure each end-point agent, the system itself, and to actively monitor and access reports on files that have been identified by the system as problematic or of interest. At this time the Control Application is able to provide configuration and monitoring services but is not yet ready for customer on-site deployment and is therefore only available in a SaaS model.
The middle-tier of the system, the Portal sever, currently runs in MS .NET and is written in c#. This tier will be upgraded to a full c++ implementation to increase scalability, efficiency, and security, in Q1 2016, and will run as a standard web server extension on a Linux platform (CentOS/Apache).
The data-tier of the system currently is running in MS SQL Server 2008/2012 and uses transact-SQL tables, but does not use any stored procedures or transactions. Although this tier is sufficient for scalability through mid to late 2016, a no-SQL version of the data tier will be developed in 2016.
The Crush server (hashing services) currently runs on MS Server 2008/2012, is written in c#/c++ and is a) being ported to run as a (c++) daemon on a standard Linux (CentOS) server, and b) being re-engineered to function as a massively parallel application (c/c++) running on NVIDIA Tesla GPU accelerated systems. The Crush server communicates with the data-tier directly and the C2 server indirectly. Multiple Crush servers can run simultaneously and are horizontally scalable and fault-tolerant.
The C2 (Command and Control) server, written in c# and being moved to c++, communicates with the data-tier directly and the Crush server and Control Application indirectly to provide scheduling, system health and integrity, and prioritization services, as well redirecting jobs to maintain fault tolerance of the back-end server components. Multiple C2 servers can run simultaneously and are horizontally scalable.
Hardware and Network:
The basic architecture of the system has two different stacks of software. First, a typical 3-tier approach isolates data storage from end-point and Control Application access with a middle-man protocol altering Portal server. In the SaaS model, the end-point and Control Application software reside on-site with the customer, and the remaining stack components reside at the SaaS hosting datacenter. The second stack consists of multiple horizontally-scalable server components that run entirely in the backend as daemons and interact primarily through the data area to provide the services that are being marketed and sold to the customers. The two stacks are kept somewhat separate from each other in order to buffer one against the other in times of extreme load and for enhanced security.
Following is a description of each software module in the system and how it relates to the others:
The system has one component for data collection (the end-point agent software, which resides on the desktop computers and servers within a deployed customer site), one component for system administration (the Control Application, which resides on a desktop computer that the customer has access to or that an analyst can access through the SaaS system), and a collection of software processes/daemons and a data storage area that comprise the back-end.
The end-point agent collects data from the end-point computer, passes it to the Portal server, which in turn stores it in the data area.
The C2 server monitors the in-flow of data from the end-points, and tasks the Crush server(s) to analyze the data and compare it to databases of known good, known bad, and watch list files, in an efficient manner.
The C2 server also provides notification to the customer of any problematic or watch-list files following the completion of the Crush server tasks.
The Crush server monitors the data area, and performs batch or real-time processing of data as instructed to by the C2 server.
Technology
CYBR’s BlindSpot software is a commercially available product that combines a small footprint end-point agent with a centralized monitoring and management system to track files and file changes on the end-point using partial-match digital fingerprints rather than rigid full-match-only file signatures. As files and data buffers are created, edited/altered, and moved either through the network or via removable media devices including USB drives, the product uses its unique and proprietary technologies in combination with industry standard technologies to identify and locate both known malware and unknown [polymorphic] malware on end-points that are continuously monitored by the product. Staff is notified, depending on the urgency or type of digital fingerprint identified, through integrations with 3rd party SIEM solutions, email/SMS transmissions, and reports that are available using the central management system. A false positive rate of partial digital fingerprint matching of ~1 in 10-12 means staff will not be bombarded with unnecessary alerts, maintaining staff efficiency.
Overview: Traditional anti-malware products use static file signatures to locate known malware but have no means of detecting unknown malware, CYBR’s product uses digital file fingerprints that can identify both partial file matches as well as full file signature matches and in doing so can locate and identify both known and unknown malware within the deployed enterprise. A combination of industry standard and publicly available algorithms and CYBR’s own proprietary algorithms, trade secrets, methods, optimizations, and intellectual property for which a patent is currently pending (which is owned solely by CYBR) are combined to form a comprehensive anti-malware platform and continuous end-point monitoring product that is completely unique in the marketplace. Through the use of our proprietary algorithms and optimizations, the product has the ability to scale to the enterprise level and can track desktops/servers as well as mobile/phone/tablet/Internet of Things (IoTs) devices.
Project Implementation: The implementation of this product would include both the commercially available BlindSpot product as well as prototypes of integration packages to connect with the on-site Security Information and Event Management (SIEM) and other systems and prototypes of end-point agents running on operating systems that are not yet available in the currently available version of the product. Both the integration and end-point agent prototypes would be based on existing modular code/functionality and would extend functionality past the currently available modules to ensure the full needs and requirements of the project are met. A full version of BlindSpot would be deployed on servers at/on the enterprise site, and prototypes of both SIEM integrations and new end-point agents would be deployed to augment the full production system. Information flow between all areas of the full system and prototypes would be tested and verified with increasing scale to ensure the level of performance required is available prior to the completion of the project.
End-point Agents: Each end-point is installed with native low-profile proprietary agent software that minimizes both its file system footprint and CPU use. The current product has a native end-point available for Microsoft Windows OSs (both desktops/tablets and servers) in production, and has native end-point agents in development/prototype stage for iOS, Android, MacOS, and RHEL/CentOS, with additional popular Linux derivatives to follow. The main job of the end-point agent is to communicate with the OS and monitor the file system for any changes in files that occur. When changes are detected, a digital file fingerprint of the file is taken and reported to the centralized data store, or cached until a later time if the centralized data store is unreachable (e,g, no cell coverage, laptop not connected to internet). The agent normally runs in “stealth-mode” and uses minimal CPU, RAM, and file system footprint so as not to disrupt the end-user’s workflow or impact system performance. Taking a digital fingerprint of a file and reporting it is very fast and thus the main job of the end-point agent is not system resource intensive. The “heavy lifting” is done on the back-end and does not burden the users or the end-point devices. Configuration of each end-point agent is conducted through the centralized management system, and changes in configuration are transmitted to the end-point agent within a few seconds (provided there is network connectivity).
Central Data Store: A collection of databases on the back end store file watch lists, known good and known bad digital file fingerprints (whitelists and blacklists containing digital file fingerprints of known malware), priority lists and configurations, end-point configurations, last-seen lists, and the full temporal accounting of all digital file fingerprints reported by end-point agents. As new threats are identified they are added to the central data store. As files on end-points change or are edited, their new digital fingerprints are added to the central data store as well. As new threats are identified though polymorphic partial matching, they are added to the known bad list as well.
Identification of Known and Unknown Malware: By comparing the databases of digital file fingerprints of known malware and digital file fingerprints of files on end-points, the product’s Crush server(s) use sophisticated algorithms to compare the partial digital file fingerprints, regardless of content of the files themselves. The product looks at the raw data (bytes) in the files when creating the digital file fingerprints and as such all file types/formats/languages are handled. This means that all file types and data in any and all languages can be compared with similar files. Binary DLLs, MS Word documents and spreadsheets (MS Excel, csv, …), JPEG images, Javascript, HTML, Executable files (.exe) — all of these files are handled by the product and known/unknown malware within them can be located using the digital file fingerprints in the centralized data store and Crush server’s analysis.
Scale, System Throughput, and Priority: A single Crush server can serve a small enterprise (100s or 1,000s of end-points), and a horizontally scalable array of Crush servers can be used to provide identification of malware for large enterprises. Similarly, databases in the central data store can be split and maintained/mirrored on several servers or run in a monolithic configuration. This makes the system highly scalable and able to be adapted to enterprises of varying sizes/scales while maintaining a good price/performance ratio. Priority lists can be designated for Crush servers such that high-priority end-points and/or high-priority malware fingerprints can be compared and identified in real-time, and similarly, low-priority lists (e.g. malware fingerprints that have not been seen in months or years) can be run in the evenings or when the system is running below normal load to ensure both immediate analysis of high-priority threats and comprehensive analysis of low-priority threats.
Integration: Several modular integration points within the product enable the straight-forward integration with 3rd party SIEM software and other reporting/management tools and systems. Distinct “notification channels” within the product are used based on the type of threat detected, the priority level of the specific threat detected, the confidence of the match (low percentage match of digital fingerprint vs high), and the location of the match (specific end-point list). Each notification channel has integration points that can be linked in with 3rd party systems so that staff are notified using software and procedures they are already familiar with and trained on (i.e., through a SIEM solution that is already begin monitored by dedicated, trained staff). Prototypes of each specific integration would need to be developed as a part of this project to match/communicate with the exact SIEM (or other) system that is in use at the deployment site in the mannemethod desired. Such a prototype would be developed for the purpose of evaluating the technical interconnectivity between systems to meet the requirements of the deployment, and following the prototype testing period, would be load-tested and stress-tested to ensure it’s performance meets the demands of a highly scalable environment, leading to a mature integration over a period of 3-6 months following the initial prototype period of 1-3 months.
Technology Section Summary: With end-points being continuously monitored by the product, both known and unknown malware threats delivered by the network and removable media will be detected and reported through SIEM system integration and direct email/SMS messages with minimal impact to the end-point (on all major OSs, including desktop and mobile). Centralized management and temporal monitoring of digital fingerprints enables the system to proactively locate and identify malware threats before zero day as well as enabling the staff to conduct their own investigations of systems either in the present or the past for forensic investigations. This makes CYBR’s BlindSpot a complete product that reaches all of the end-point devices to ensure safety and security from all types of malware threats.
Defense Utility
The blockchain’s cyber security posture will be greatly enhanced by BlindSpot. CYBR’s executive team works with various military and federal organizations and has a deep understanding of the cyber security challenges that face the enterprise today including advanced persistent threat (APT), polymorphic and pleomorphic malware, zero day attacks and the need to locate white and black files in real time. These threats have now permeated to the blockchain and must be secured.
Company and Customers
The proposed team includes CYBR, Inc. executive management and staff. The company is a works closely with its sister company, 21st Century Technologies, Inc. (21CT), which is a HUBZone certified, Small Business entity. 21CT serves as a value added reseller (VAR) for CYBR, Inc. and is currently a teammate on the DOMino classified DHS contract as a subcontractor to Raytheon.
Existing, paying customers include Stratford University, Test Pros and Devitas. The company also has integrator and VAR partner relationships with Anomali (formerly Threatstream), Lockheed Martin (Cyber and Space) and various commercial entities, which the company believes will become paying customers in 2019.
Transition and Commercialization
Our technology is a commercially available product and commercial sales have been made. The company is actively working to scale this solution to hundreds of thousands of users, which the company has deemed do-able and is in the process of horizontally scaling.
Data Rights Assertions
CYBR, Inc. currently holds a provisional patent and incorporates other trade secrets into the solution. No unreasonable restrictions (including ITAR) are placed upon the use of this intellectual property with regards to global sales.
submitted by CYBRToken to u/CYBRToken [link] [comments]

NocRoom High Speed Web Hosting VPS Now Accepting Bitcoin - Bitcoin Black Friday $1

NocRoom, LLC ( http://nocroom.com ) is a provider of dedicated servers, colocation, IP transit, VPS and Cloud Exchange Servers. We offer our premium, high speed, all fiber network. We currently manage over 500 dedicated servers in at least 2 different locations. Our main headquarters is located in Miami, Florida.
We consider ourselves a pioneer in the this industry because we are utilizing the newest technology available to us to manage our network with Multiple Tier 1 bandwidth providers call NocRoom home; including AT&T, CenturyLink, Cogent, Comcast Business Class, FiberLight, FPL FiberNet, Internap, Level 3, TW Telecom, Verizon Business and XO. NocRoom facility is also home to several Tier 2 carriers.
NocRoom Bitcoin Black Friday! Promo Deal $1 First Month then $14.99/mo Coupon Code: buck - Select Promo Package. What you Get ? 60 seconds or less setup time upon Payment!
Details or Order Here: http://nocroom.com/datacentevps/
BitcoinTalk Thead: https://bitcointalk.org/index.php?topic=1185478.0
NocRoom Social Facebook: https://www.facebook.com/MiamiNetwork Twitter: https://twitter.com/nocroom LinkedIn: http://linkedin.com/company/nocroom GooglePlus: http://google.com/+Nocroom-MiamiColo-BitcoinVPS
submitted by stilv to bitcoinxt [link] [comments]

NocRoom High Speed Web Hosting VPS Now Accepting Bitcoin - Bitcoin Black Friday $1

NocRoom, LLC ( http://nocroom.com ) is a provider of dedicated servers, colocation, IP transit, VPS and Cloud Exchange Servers. We offer our premium, high speed, all fiber network. We currently manage over 500 dedicated servers in at least 2 different locations. Our main headquarters is located in Miami, Florida.
We consider ourselves a pioneer in the this industry because we are utilizing the newest technology available to us to manage our network with Multiple Tier 1 bandwidth providers call NocRoom home; including AT&T, CenturyLink, Cogent, Comcast Business Class, FiberLight, FPL FiberNet, Internap, Level 3, TW Telecom, Verizon Business and XO. NocRoom facility is also home to several Tier 2 carriers.
NocRoom Bitcoin Black Friday! Promo Deal $1 First Month then $14.99/mo Coupon Code: buck - Select Promo Package. What you Get ? 60 seconds or less setup time upon Payment!
Details or Order Here: http://nocroom.com/datacentevps/
BitcoinTalk Thead: https://bitcointalk.org/index.php?topic=1185478.0
NocRoom Social Facebook: https://www.facebook.com/MiamiNetwork
Twitter: https://twitter.com/nocroom
LinkedIn: http://linkedin.com/company/nocroom
GooglePlus: http://google.com/+Nocroom-MiamiColo-BitcoinVPS
submitted by NocRoom to CryptoCurrency [link] [comments]

NocRoom High Speed Web Hosting VPS Now Accepting Bitcoin - Bitcoin Black Friday $1

NocRoom, LLC ( http://nocroom.com ) is a provider of dedicated servers, colocation, IP transit, VPS and Cloud Exchange Servers. We offer our premium, high speed, all fiber network. We currently manage over 500 dedicated servers in at least 2 different locations. Our main headquarters is located in Miami, Florida.
We consider ourselves a pioneer in the this industry because we are utilizing the newest technology available to us to manage our network with Multiple Tier 1 bandwidth providers call NocRoom home; including AT&T, CenturyLink, Cogent, Comcast Business Class, FiberLight, FPL FiberNet, Internap, Level 3, TW Telecom, Verizon Business and XO. NocRoom facility is also home to several Tier 2 carriers.
NocRoom Bitcoin Black Friday! Promo Deal $1 First Month then $14.99/mo Coupon Code: buck - Select Promo Package. What you Get ? 60 seconds or less setup time upon Payment!
Details or Order Here: http://nocroom.com/datacentevps/
BitcoinTalk Thead: https://bitcointalk.org/index.php?topic=1185478.0
NocRoom Social Facebook: https://www.facebook.com/MiamiNetwork
Twitter: https://twitter.com/nocroom
LinkedIn: http://linkedin.com/company/nocroom
GooglePlus: http://google.com/+Nocroom-MiamiColo-BitcoinVPS
submitted by NocRoom to bitcoinxt [link] [comments]

NocRoom High Speed Web Hosting VPS Now Accepting Bitcoin - Bitcoin Black Friday $1

NocRoom, LLC ( http://nocroom.com ) is a provider of dedicated servers, colocation, IP transit, VPS and Cloud Exchange Servers. We offer our premium, high speed, all fiber network. We currently manage over 500 dedicated servers in at least 2 different locations. Our main headquarters is located in Miami, Florida.
We consider ourselves a pioneer in the this industry because we are utilizing the newest technology available to us to manage our network with Multiple Tier 1 bandwidth providers call NocRoom home; including AT&T, CenturyLink, Cogent, Comcast Business Class, FiberLight, FPL FiberNet, Internap, Level 3, TW Telecom, Verizon Business and XO. NocRoom facility is also home to several Tier 2 carriers.
NocRoom Bitcoin Black Friday! Promo Deal $1 First Month then $14.99/mo Coupon Code: buck - Select Promo Package. What you Get ? 60 seconds or less setup time upon Payment!
Details or Order Here: http://nocroom.com/datacentevps/
BitcoinTalk Thead: https://bitcointalk.org/index.php?topic=1185478.0
NocRoom Social Facebook: https://www.facebook.com/MiamiNetwork Twitter: https://twitter.com/nocroom LinkedIn: http://linkedin.com/company/nocroom GooglePlus: http://google.com/+Nocroom-MiamiColo-BitcoinVPS
submitted by stilv to Hosting [link] [comments]

NocRoom High Speed Web Hosting VPS Now Accepting Bitcoin - Bitcoin Black Friday $1

NocRoom, LLC ( http://nocroom.com ) is a provider of dedicated servers, colocation, IP transit, VPS and Cloud Exchange Servers. We offer our premium, high speed, all fiber network. We currently manage over 500 dedicated servers in at least 2 different locations. Our main headquarters is located in Miami, Florida.
We consider ourselves a pioneer in the this industry because we are utilizing the newest technology available to us to manage our network with Multiple Tier 1 bandwidth providers call NocRoom home; including AT&T, CenturyLink, Cogent, Comcast Business Class, FiberLight, FPL FiberNet, Internap, Level 3, TW Telecom, Verizon Business and XO. NocRoom facility is also home to several Tier 2 carriers.
NocRoom Bitcoin Black Friday! Promo Deal $1 First Month then $14.99/mo Coupon Code: buck - Select Promo Package. What you Get ? 60 seconds or less setup time upon Payment!
Details or Order Here: http://nocroom.com/datacentevps/
BitcoinTalk Thead: https://bitcointalk.org/index.php?topic=1185478.0
NocRoom Social Facebook: https://www.facebook.com/MiamiNetwork Twitter: https://twitter.com/nocroom LinkedIn: http://linkedin.com/company/nocroom GooglePlus: http://google.com/+Nocroom-MiamiColo-BitcoinVPS
submitted by stilv to BitcoinAll [link] [comments]

[Table] IamA splat, editor/moderator/reviewer on overclockers.com and sysadmin at a cancer research organization. AMA!

Verified? (This bot cannot verify AMAs just yet)
Date: 2013-08-13
Link to submission (Has self-text)
Questions Answers
This just got cross posted to /sysadmin ; as a fellow research-field oriented sysadmin it gets worse... I too started in the Quake/HL/CS/TF timeframe, but got my degree in CompSci. Have you ever dealt with mice (the mammal kind; I've got worse stories)? Certs: just got my RHCSA this year. I've got the RHCE scheduled for october, and I'm studying for the CCNA, though I use HP switches.
How do you backup desktops / servers? Backups: Luckily, I don't do desktop support. We have another IT group that does that, I'm completely independent from them and I only have to take care of servers (and my own desktop). The physical servers are backed up to tape with Bacula. Our virtual servers are backed up with Veeam. My own desktop is backed up to my NAS share using synctoy (yes, i use windows on my desktop).
How much disk space do you have in one server? One off systems: As in physical servers built by hand? 0. I'm pretty much a Fujitsu shop with a few Dells. I definitely don't have time to be piecing servers together. disk space: only a few TB per server. I think the better answer would be that we have an Isilon X200 cluster that is 140 TB.
one off systems: As in physical servers built by hand? More as in unique software; such as this computer runs the HPLC. I guess in that case I only manage a handful of physical servers and a few VMs that are made for running one special piece of software or analyze data from one piece of scientific equipment. We have many other scientific devices that are attached to PCs that are "community" devices, but I don't have to manage them. and we've got a microscopy group that is separate from me too, with their own machines and devices.
If you are moving to 1gbs are you looking to increase the MTU? I was working on that but had some issues with firewalls for my windows-putty users. First, just to clarify, we're going to 10G from the 1G we have right now. I'm not our main network guy, so I'm not entirely sure but I doubt we'll change the MTU simply because we don't have a remote site so the majority of our traffic is regular internet traffic.
As for our backend network, I do use jumbo frames on a couple VLANs for our storage.
That most important question for any sysadmin...vi or emacs? Vi improved.
Anand Shimpi and Dustin Sklavos had an interesting podcast on the merits of Haswell on the desktop. In short, Dustin echos the enthusiast community's frustration with overclocking headroom decreases from Sandy Bridge Ivy Bridge Haswell. It seems like IPC has gone up but maximum frequency has gone down so the ratio seems almost 1:1. Then there is the issue of the use of TIM and IHS glue cap that caused some to delid their CPUs (and void their warranties). Question 1: What are your thoughts on the overclocking headroom decreases that we've seen? Question 2: Is Intel doing enough to cater to the enthusiast community? Question 3: How do you feel about the delay in the release of Enthusiast parts by Intel (Sandy Bridge-E & Ivy Bridge-E) versus mainstream parts (Sandy, Ivy, and Haswell)? Intel makes good chips and they do keep pushing technology forward, but they will never do overclockers any favors. They will always be doing whatever they can to make money. AMD will also do the same thing. Intel seems to think enthusiast solely means "deep pockets". At the same time, there always seems to be a lot of "the sky is falling" reporting done by many tech journalists. Intel hasn't completely forgotten about overclockers and I don't think they ever will completely let that group disappear. And really, what incentive does Intel have to completely lock out overclockers? Sure, deny us our warranty, we'll go ahead and buy another chip and give you more money. How could you deny that as a company? as for overclocking headroom decreases, one can only hope that means we've got a whole new architecture coming out soon, something like the transition from Pentium 4 to Core.
Do you have a home lab setup to learn/test on? If so, what does it consist of? At home I've got a 1u dell poweredge sitting in a closet which is my main server. I run bageez.us off it which was supposed to be my way of giving back to the community, by running a Linux torrent site. Other than that I've got two htpcs running Debian, a desktop windows machine for gaming/reviewing hardware, and a file server with 8 tb running Debian and KVM with a few Debian VMS.
Do you still have that site going? I tried your link but it didn't work. Looks like I let the SSL cert expire. I'll fix that tomorrow. It works on my end but I think I want to recode a few things and possibly get it to work with other trackers. Right now the torrents will only work with my local tracker.
Need to monitor that ;D. Yeah it's one of those things where I seem to be the only one visiting the site, so why stress about it. I also set up owncloud, but again, i'm the only one that uses it. :(
Do you get to keep the hardware you review? - Do you prefer the black theme or the white theme? Most of the time, yes.
Black. I don't mind the white theme that much tho. edit: he's asking about the forum default skin at overclockers.com/forums
What is your #1 piece of advise for any linux sysadmin? That's a tough one. Do you mean someone looking to become a sysadmin or one that is already a sysadmin?
I guess I didn't specify that did I? I ask the question because I've been doing mostly Windows sysadmin duties for about 2 years and some linux admin stuff. I'm falling in love with Linux and I would love to have a job dedicated to just *nix What advise/suggestions would you give someone that is wanting to make the transition? I think what really got me the best knowledge was forcing myself to use a "less polished" distro as my main rig for a few years. Once you are forced to learn, you'll learn quickly. Picking up an rhcsa book will help too even if you don't plan on taking the exam. Go through it and do the exercises. Install a distro, set it up, then format and do it all over. You can use virtual box for the same result without killing your main rig.
Do you still use FreeBSD? If so, what exactly do you use it for now? No, but I wish I did. I stopped using it because the GPU support in Linux was better on my desktop, and now I work mostly with CentOS, and it would be a lot of work to change 100ish servers over to FreeBSD.
What did you use to train yourself in everything? Just break and fix? Pretty much just the experience of using it daily on my desktop for years. Running gentoo and Slackware really gets you used to doing things for yourself.
Configuration management of choice for those 18 servers? I'm just a jack of all trades sysadmin with a strong focus on problem solving. Are you trying to cure cancer with those 18 nodes or mining bitcoins? I started playing around with puppet but haven't really gotten the hang of it. Right now the cluster is running ROCKS with Grid Engine, and I just use the rocks commands to provision/wipe nodes.
What's the hardest part about getting started with puppet? I think its mostly just finding the time to sit down and have enough time to emerse myself in it.
700+ centos nodes across a few clusters here and I'm loving ansible. Nice. I've heard that ROCKS becomes a bear at scale, but for now it's pretty simple and quick. My plan is to keep adding another 18 nodes every year (one full blade cluster) every year, as long as I can get funding, so I'm keeping my eyes open for other solutions for provisioning. Bright cluster manager is another one I have on my radar.
Computer didn't work for 5 months (it started then after i downloaded skyrim from steam it shut off, then finally worked last month). Put my new graphics card in, then problems ensued. Here: Link to www.reddit.com. 1st step i'd do is remove all nonessential parts from the computer. Leave the cpu and 1 stick of ram. Pull out the graphics card, don't connect any hard drives or cd drives. On the back, connect the monitor to the on board video card and connect the keyboard. Does it power on? Do you get any error messages other than it saying there is no OS? Then power down and connect things one by one until you figure out what part is causing the problem. If you think it's the drivers, you can boot into safe mode (i hope windows 8 still has that, press f8 while booting), then run Driver Sweeper, to remove the graphics drivers. I haven't tried this on windows 8 so i'm not sure if it will run or not. I don't think you need to do a full format and reinstall.
I'll try this tomorrow after work for sure. Do you reddit enough that i could contact you for more advice for help if i run into anything else? (i did contact nvidia team for help, they just told me to delete old drivers without any other help then those words). I don't blame you if you don't want to say you are able to help me with this situation. Humans be humans. Was there a specific reason to go into a cancer research lab? Or was it just a job that came around? No I don't go into photoshopbattles. I pretty much just do what I need for websites and that's it.
How do you like your baked potatoes? (please get into specific detail). It just happened to be the job I found but I love the environment. Much different than a corporate job.
I'm not a fan of baked potatoes but I do love curly fries if that counts for something.
You should really join us in the BAPC IRC channel. I do hang out in the unofficial Overclockers.com irc channel quite a bit. I'll try to drop by.
Do you do any sort of automation for firmware updates? Firmware automation? Nope, and I don't think I'd ever want such a thing. I've been looking at puppet as a way to automatically update software though.
I saw below you guys have some Dell servers, what models and do you use their Lifecycle Controller? We have a couple r610 servers and an equallogic storage box. I haven't heard of this life cycle controller.
What are the specs of your personal rig? Intel i7 3770k @ 4ghz.
Zalman CNPS9900LED cooler.
Patriot ddr3 2x2gb @ 800mhz cas7 (rated for 1200mhz cas9 but I can't boot at that speed anymore for some reason)
MSI Z77A-G41.
ATI Radeon HD 6870.
OCZ Revodrive X2.
How come you have a 3770k but only 4GB of RAM and a 6870? Seems a little overpowered in the CPU category. For benchmarking, mainly. The 3770k was our standard platform for reviews when I bought it. The rest is leftovers from various reviews. We don't get paid, so basically we work for hardware when we write reviews, more or less.
Wait when you review hardware you get stuff? Yes, hardware vendors provide review samples.
Have you ever had an OEM send you equipment different from the consumer version? (Say a factory overclocked version) and claiming it was the standard. Nope. Even if they did, we'd certainly review it as the hardware is, not as they intended it to be.
What's the worst PC loadout you've ever seen? PC load letter? What the f does that mean?
[email protected] JK, doesn't work well on a cluster unfortunately. Unless you have any perls of wisdom on how to make it work on a cluster? Well, it would work just as it does on any other group of computers. I'd have to run one client on each computer and they'd all check back to get their own workloads, so it would really take out the "cluster" usage and turn them just into regular blade servers.
How old are you? Young 30s.
Have you gone to college and completed a bachelor's degree, if not, do you regret it? Yes, BS in Mechanical Engineering.
How did you prove yourself to be worthy of that initial Jr. Sys. Admin job? I listed everything I could think of that I've done that was computesysadmin related. I had administered several web servers over the years, and experimented with many different distributions as my daily driver on my main desktop, so I was very comfortable on the command line and with day to day tasks. I was asked a few 'test' questions on the interview but I think they were more to gauge exactly what i did and didn't have experience with, not so much to make or break me.
Lastly, congrats on doing what you love for a living. Cheers to your future. And thanks. i definitely wake up in the morning with a different attitude than i used to, and that makes a big difference.
Configuration Management / Vagrant / Clouds. I have start playing with configuration management, but haven't gotten anything in production yet. I only provision new VMs every once in a while, and once the computer nodes are up they are pretty stable.
What is your scripting language of choice? I use straight up bash for most things, and python for some. I'm trying to learn more python.
How do you feel about some distros moving away from init.d and going to systemd? I like init.d because it's what I know. Systemd is just a different way of doing things, I'm sure I'll like it once I learn it.
As a OCF Member I have to ask, What is the most extreme cooling you have dealt with?(LN2, Phase Change, Water, D-Ice, etc.) LN2, at the benching party in philly last year. We definitely need to get one of those on schedule again. Also, my work has LN2 and D-ice sitting around but I haven't asked if it's ok for me to play with those yet. One day, i'll ask, and it will be awesome if they say yes. fingers crossed.
So, can I have some of your left over gear? Joking, heh heh... Seriously though, got any gear that's collecting dust? Mostly by the time we're ready to part with gear, it's not worth much and is terribly outdated. Or, it's been burned up by pushing too many volts.
What do you do with the old gear? Do you scrap up a functional computer and donate it to a charity, or just proper e-waste recycling? If it's not on my computer or benching station, it's in my closet. And my wife doesn't like the amount of computer stuff in my closet, so I'm sure I'll start looking for some way to recycle stuff soon.
Where does a young grasshopper starts to learn all of these materials wise one? Well, you could get yourself a RHCSA prep book (linked to the one i have and found useful) and go through all of the exercises. The way I learned was basically to set up my own servers, either physical or virtual, at home, and run them. I think FreeBSD, Gentoo, and Slackware were the most beneficial to me in that they don't really make choices for you, so you have to configure things for yourself which forces you to read the documentation and learn. They all have excellent documentation, btw. If you want to go a step further, linux from scratch will really teach you about the operating system from the ground up.
From there, come up with little projects for yourself. Like making a home NAS, setup NFS and Samba shares, install XBMC on a HTPC and hook it up to your tv to stream movies and music. Setup a webserver and owncloud. Stuff like that.
Sorry I'm late but... how old were you when you first starting tinkering with Linux and such? I'd like to be a sysadmin or similar when I finish school so I figured you were the right person to ask. I was 19 when I first made that half life/counterstrike server. I didn't even know what ssh was and it took a good amount of explaining for me to finally understand. The freebsd documentation is amazing and will walk you through just about everything step by step. To get NAT configured I had to use another how to but setting up that server taught me a ton.
Are you an Nvidia or an AMD guy? It's changed several times over the years. I used to be solely Nvidia because of Linux, but AMD has been stepping up their game and getting their drivers usable, so I currently run all AMD.
How much of a PITA is it for you to be HIPAA compliant? It's not really that tough. Luckily there's only a couple projects going on right now that have special needs above and beyond regular security needs.
What do you use for storage? We have a few Jetstor SANs, a couple Promise RAID boxes, and an Equallogic box as our VMWare backend. But our main mass storage is Isilon X200.
Whoops my bad, meant 1.18 not 1.8 it'd be gone if it was 1.8. sorry. I am using a hyper 212 EVO in the standard push configuration. Well 1.18 is too low for 4.4ghz.
Only 4gigs of ram in your rig ? Yeah...I've got 16 in my work PC for running VMs, and 16 in my VM host at home too. I'll probably buy more soon.
Oh ok, what V would I go to? I was able to initially get 4.4 with 1.18 and 0 whea errors, what V would you recommend? This is my first oc btw. Bump it up one step at a time until you are stable. Be methodical about it. You can check out what values other people are getting on hwbot.org.
Ok Ill do that, thanks man, at what V if the errors dont go away should I stop advancing them? Most likely you will want to stay around 1.6v. I'm not very familiar with that chip specifically so I'd check hwbot to see what other people have posted and go by that. Obviously remember that not all chips are the same, so you can't expect to get exactly what other people get.
1.6, that seems a bit high for my 212 EVO, a few days ago I did have it at 1.18 without any WHEA 20 errors. That's why I'm saying take it slow, one step at a time.
What do you think of this quote by Richard J. Schwartz? "The impact of nanotechnology is expected to exceed the impact the electronics revolution has had on our lives." Sounds good to me. I can't wait to see what comes next.
Actually nodes, or are some of them VMs? Physical blade servers as nodes. with 144 GB ram each.
Zfsonlinux in use? No I haven't used zfs at all.
Hey... You're pretty cool. Thanks. You're not too bad yourself.
The answer should be ''i wish i could say the same to you'' I'm not like that.
Just how big is your hpc. Only 18 nodes :/ but its more what I do with it...
How'd you get your nickname. Back when I played CS in the dorm freshman year of college, I used to get killed all the time. So I started calling myself "jack splat", as a play on the nursery rhyme (jack sprat), then shortened it to 'splat' on most of the websites I signed up for.
Describe a SHTF moment at your work place. I can imagine it must be highly stressful being the sole responsible person to keep all that gear running. I definitely have a few and luckily they aren't that bad. One of my first few months, I decided to connect this wireless ap to the network to test it out one morning. As I was being awesome managing the cable to make it look clean, one of the security guards came into the server room and said they had no internet. I looked at our switches and they were all lit up solid. By hooking up the ap, which had spanning tree turned on, I took down the network of the entire building.
Ouch...that's definitely a SHTF moment. glad you came out unscathed. Luckily, all I had to do was unplug it and everything went back to normal. I then set up a spare switch at my desk and played with it before figuring out that STP needed to be disabled on the AP. Now it's been running for over a year without incident.
Would you rather fight 100 duck sized horses or 1 horse sized duck? I'd go for the horse sized duck. Seems like more of a challenge.
U mad? Nah, I'm feeling pretty good today.
Last updated: 2013-08-18 07:16 UTC
This post was generated by a robot! Send all complaints to epsy.
submitted by tabledresser to tabled [link] [comments]

Disc not found when installing CentOS in VirtualBox How to install centOS via PXE LAN (Serva) RSK - Install a node with Java Installing Docker on CentOS on Virtual Box - YouTube LINUX: Installing from the network

How to Edit DNS Servers in CentOS. Changing DNS server configuration can be very important. A switch in DNS can aid a server or user’s privacy, fix resolution issues, or allow you to use a self-created DNS server so you have full control over the process. An Ethereum network consists of multiple “Ethereum nodes”. A node is a constituent part of the Ethereum network, and it serves a key function by being one of the many servers that keeps a copy of the blockchain in storage. Today we will discuss in detail how to setup full Ethereum node in a CentOS 7 VPS server. The Bitcoin network is a collection of computers all over the world running the Bitcoin Core software that verifies transactions and blocks. It’s the distribution of these “nodes” (the term for a computer attached to the network) and the fact that anyone can set one up that makes Bitcoin “decentralized.” This means that anyone anywhere can set up a Bitcoin node as long as they have ... Secure your DNS over HTTPS; Covid-19 ID Bar; Recent Comments. David B on SSH over USB (Windows) Jordan N. on SSH over USB (Windows) David B on How to install mosh on CentOS 6.9; Sava Chankov on How to install mosh on CentOS 6.9; klausrosetoo on They learned human ~ Deep Learning Go – Part 1; Archives. August 2020 (3) July 2020 (1) April 2020 ... CentOS 6.10 Network Installation Guide. 1. First start by downloading the CentOS 6.10 Network Install ISO and then create a bootable USB stick using LiveUSB Creator called Rufus, Unetbootin or terminal based Bootiso. 2. Next boot your system using the bootable USB or CD, at the Grub menu, select Install or upgrade existing system and hit enter.

[index] [49613] [1289] [46216] [12753] [43326] [49497] [47818] [16690] [43149] [38054]

Disc not found when installing CentOS in VirtualBox

This video is unavailable. Watch Queue Queue. Watch Queue Queue Red Hat 7/CentOS 7 network configuration or IP configuration is an important task to a Linux system administrator. After completing RedHat 7/ CentOS 7fresh installation, you have to first ... This is the first video in a series on working with the bitcoin lightning network, a second layer trustless network on top of bitcoin. In this video I go over the initial setup process which will ... To be used later for software demonstrations. In this video we start an installation of openSUSE from the network having created an NFS installation server and DHCP server. This is the first step in automating our openSUSE Linux install.

#